Products

Heritage protective coatings install the highest grade protective wall coatings available in todays market place.

Every home is different and has individual requirements; however our coatings generally have these specifications

Transforms the appearance of your home
Eliminates the need for frequent painting
Beautiful textured finished in 12 architectural colours
Specialist application
Will not chip, flake or peel
Weatherproof
Microporous to allow the walls to breathe
Resists dirt, mould, algae and acid rain
Self cleaning
Hides surface imperfections
Alkali resistant

Spray Coating

Well- formulated coating based on Pliolite resins are hard and resist dirt pickup and hence are well suited to residential properties. They are self- cleaning, any dirt retained is easily washed away by rain. Deep penetration into the masonry surface ensures long lasting adhesion. The micro porous nature of Pliolite based coatings means that they protect the masonry surface from wind driven rain, yet allow entrapped moisture vapour to escape

Trowel and Roll

It is an excellent barrier to atmospheric carbon dioxide, water and chlorides whilst remaining totally breathable.The ultra-violate and weather resistant properties of this coating encourage long term protection and preservation of the home whilst leaving an attractive textured appearance capable of concealing surface blemishes.

Monocouche

The K Rend Silicone range incorporates silicone water repellents as an integral part of the cement based render system.This silicone technology imparts a high degree of water repellency to the render surface whilst allowing water vapour to pass through the render and let the substrate breathe.

Clearguard Coating

Clearguard is based on Polyoxoaluminium Stearate in a solvent carrier used in protecting brick, stone, concrete, and masonry against rainwater penetration. Clearguard does not change the aesthetic appearance of the substrate after treatment. On application, dependant on the porosity of the material to be treated, it penetrates up to a depth of 5mm, effectively repelling driving rain. The surface, however, can breathe, thus ensuring that previously absorbed moisture will evaporate and thus allowing the treated areas to dry out normally.

Important

It’s critical that the correct coating is applied to the correct sub strait after the required preparation.